”Same old look but with a spacious new sound.” ’What Hi-Fi?’ - 5 Star review.
The Denon difference
Founded in 1910, Denon has over a century of audio experience. This experience becomes clear, as soon as you listen to the Denon AVR-X2800H. With a high performance, discrete 7-channel amplifier at its heart, this Denon AVR has a perfect balance of power and control. With 95 watts per channel, the full force of home cinema movies and gaming is easily realised.
Experience the immersion of Dolby Atmos and DTS:X
Dolby Atmos and DTS:X use ceiling or up-firing speakers for three-dimensional and fully immersive sound. Whether it’s rain falling in a tropical jungle or the intense sound of overhead gunfire, Dolby Atmos and DTS:X put you in the centre of the action.
Extra height, without the speakers
As impressive as Dolby Atmos and DTS:X sound, it’s not always possible to accommodate the extra speakers. Dolby Atmos Height Virtualization and DTS Virtual:X Height Virtualisation technology go some way to help. Play any Dolby format and enjoy a more immersive sound with virtual height enhancement – using your existing speakers. DTS Virtual:X also creates a more enveloping sound from any DTS codec. Compatible with 2.1, 5.1 or 7.1 speaker configurations, DTS Virtual:X gives the impression of height and immersive sound.
Enhanced 8K, HDCP 2.3 HDMI compatibility
Upgrading on previous AVRX2000-series receivers, the X2800 now features three, 8K compatible HDMI sockets, compared to one. Both outputs are 8K compatible, too. They support 8K pass-through, 4K/120Hz and 8K upscaling of 4K content, too. The X2800 also supports the latest copy protection standard, HDCP 2.3.
Wide-ranging HDR support
The AVR-X2800H also supports a wide range of High Dynamic Range video formats. These include Dolby Vision, HDR10 and HLG. It also supports HDR10+, which enhances picture realism by sending dynamic Meta data to your TV, as well as Dynamic HDR. In short, whatever the format used by the film, game or stream, the Denon supports it.
Made for gamers in mind
The enhanced HDMI interface makes this Denon AV receiver the perfect choice for gaming. There’s support for 4K/120Hz and VRR (Variable Refresh Rate), giving you the best resolution and clarity. Quick Frame Transport (QFT) and Auto Low Latency Mode (ALLM) help eliminate lag and frame tearing, giving you a smoother, more responsive gaming experience.
HEOS built-in - for the finest multi-room audio
HEOS multi-room music systems connect together by dual-band Wi-Fi, making them easy to set up with your existing home network. Up to 32 HEOS units can be set up at one time, ensuring even the largest of homes are covered for multi-room music. With HEOS already built-in, the AVC-X2800H is ready to go as a single 'zone' without any further adaptors.
Control it all with the HEOS app
Once you've set up your HEOS speaker system, you can stream music effortlessly via the dedicated HEOS app. Available for Apple iOS and Android, the app not only lets you stream your stored music but also Internet radio services and popular streaming services such as Spotify, Tidal, Napster and Deezer.
Use with your choice of voice assistant
Compatible with Siri, Alexa and Google Assistant, the AVR-X2800H works with your voice assistant of choice. For Alexa or Google Assistant control, simply download the HEOS app. Pair your Echo device if you’re using Alexa and you’re good to go – adjust the volume, skip to the next track and switch inputs simply by asking Alexa or Google. For control via Siri, simply link the amp via Apple AirPlay 2 and enjoy voice interaction and AirPlay 2 multi-room support.
Audyssey MultEQ XT for optimised set-up
Featuring Audyssey's MultEQ XT technology, the AVR-X2800H adapts itself to your room's acoustics. Use the supplied Audyssey measuring microphone and the system tunes the AV receiver to provide the smoothest, most optimal overall listening experience for your room. If you want to take this even further, purchase the MultEQ Editor App (at additional cost) and you've access to advanced user settings.
Connect it all – from turntable to TV
With six HDMI inputs (three 8K, three 4K), the Denon has you covered for connecting all your video and gaming devices. Optical digital inputs are ideal for connecting older devices or upgrading the sound from a compatible CD/Network player. Four analogue inputs are perfect for Hi-Fi components, plus there’s a further, dedicated MM phono input for plugging in a turntable.
Quick Selects for the perfect sound – instantly
With such user flexibility, getting the perfect sound can be a complex business. For this reason, Denon has fitted the AVR-X2800H with four Quick Select audio presets. Take your time in setting the ideal sound balance for your TV, Blu-ray, games console and music source and recall them at the touch of a button for the ideal sound, instantly.
Get sound your big-screen TV deserves, with the Denon AVR-X2800H.
Compact yet technically innovative, the Fyne Audio F5E delivers high-end sound for less.
Your gateway to high performance sound
Using many of the technologies found in their more expensive speakers, the Fyne Audio F5E is an affordable introduction into high-end sound. Ideally used in smaller rooms, these compact speakers pack a considerable punch for their size. The neat size and built-in wall brackets also makes them ideal for using as effect speakers within a Fyne Audio F500E home cinema speaker system.
Smooth and spacious top-end
The innovation starts right at the top with the F5E speakers. Rather than placing the titanium tweeter separately, it’s within the centre of the woofer unit. Using their proprietary IsoFlare waveguide, the high frequency sound blends seamlessly with the rest of the mix, giving a wide and natural-sounding soundstage from a single point source
Multifibre cones with fluted rubber surrounds for natural-sounding vocals
The main drive unit is designed and engineered with maximum attention to detail. The multifibre cone is attached to the chassis by fluted rubber surrounds. This effectively damps unwanted resonances, making the speakers sound exceptionally smooth and lifelike.
Unique BassTrax port system
The engineering excellence continues right to the bottom of the speaker, with the BassTrax port system. Rather than using a basic bass port at the front or back of the cabinet, Fyne Audio has developed a sophisticated downwards-firing port system. Channelling the air down a profiled diffuser, the air is dispersed uniformly in the room. This neat bit of design makes the speakers far less fussy about room positioning, making them easier to accommodate in most homes.
Enjoy expansive sound from compact speakers, with the Fyne Audio F5E.
Designed to maximise your home cinema’s impact, the Fyne Audio F3-10 hits hard.
The ideal sub for Fyne Audio home cinema systems
Developed in conjunction with Fyne Audio’s speakers, the F3-10 subwoofer makes the ideal home cinema solution. With a mighty 475 amp, powering a 10 inch cone, you get deep yet controlled bass that’s perfectly suited to medium-sized rooms.
Deep, low-turbulence bass
Featuring a 10 inch bass cone, the Fyne Audio F3-10 drops to 35Hz, effortlessly reproducing the cinematic rumble from action movies. With its down-firing port, the bass is smoothly channelled from the cabinet, reducing turbulence and ensuring a consistent in-room performance.
Mighty 475 watt amp for tight control
Keeping the thunderous bass under tight control is a high current, Direct Digital (DDX) amplifier with advanced DSP technology. With around 475 watts of clean power to hand, it has little trouble in keeping the bass cone under tight control.
Adjustable settings, including Bass Boost
With Normal and LFE settings, the F3-10 connects to both AV and hi-fi systems, with an adjustable sub level optimising the bass response to your room. For added ‘thump’, there’s a switchable Bass Boost mode. If the sub is placed behind you, then simply switch the Phase control to keep the subwoofer in step with the front speakers.
Classic, black ash finish
With its classic black ash finish, the F3-10 blends well with most systems. Rounded edges soften the subwoofer’s bulk, while the feet help adsorb vibration, promoting a cleaner and more natural bass response.
Experience a whole new level of deep down power, with the Fyne Audio F3-10.
Compact and versatile, the Fyne Audio F5E LCR delivers spacious sound within a multitude of system variations.
LCR versatility
The Fyne Audio F5E LCR is designed to work well in Left, Centre and Right locations, making it ideal for use in multi-channel audio systems. Use it as a centre or effect speaker for home cinema, or pair up two for unobtrusive, wall mounted stereo sound.
The perfect partner for an F500E home cinema speaker system
Styled to match the F500E-series, the F5E LCR is the natural choice for a full, Fyne Audio home cinema speaker package. More than this, the sound perfectly syncs with the other speakers, meaning you get a smooth, consistent sound right around your room. With its lifelike vocal performance, the F5E LCR also makes a great centre speaker upgrade for other speaker systems, too.
Seamless sound between the front speakers
When using the F5E LCR as a centre speaker, it seamlessly fills the space between your front speakers. Using their proprietary IsoFlare waveguide, the high frequency sound blends harmoniously with the rest of the mix, giving a wide and natural-sounding soundstage from a single point source, making this small speaker sound much larger than it looks.
Multifibre cones with fluted rubber surrounds for natural-sounding mid-range
The main drive units are designed and engineered with maximum attention to detail. The multifibre cones are attached to the chassis by fluted rubber surrounds. These effectively damp unwanted resonances, making vocals and music sound exceptionally natural.
ABR for bass reinforcement
Fitted with an ABR (Auxiliary Bass Radiators), the F5E LCR does away with the need for bass ports. This makes it easy to place the speaker against a wall, without distorting the bass response. The ABR helps to sustain the bass, giving this compact speaker its characteristically rich sound.
Experience immersive sound from a compact speaker, with the Fyne Audio F5E LCR.